The RTK Module brings centimetre-level positioning to the DJI Mavic 3 Enterprise and Mavic 3 Thermal, mounting to the aircraft’s top accessory port with built-in thumbscrews — no tools, no modification, fitted in seconds.
With RTK fix, the aircraft positions to 1 cm + 1 ppm horizontally and 1.5 cm + 1 ppm vertically, drawing corrections from an NTRIP network service or a DJI D-RTK 2 Mobile Station. For mapping and survey work, that’s the difference between needing a full network of ground control points and needing a handful of checkpoints — a change that typically saves more time on the ground than the entire flight takes.
TimeSync 2.0 aligns camera and positioning data to microsecond level, so each image carries an accurate position at the moment of capture rather than an interpolated estimate. The module also logs raw observation data for PPK workflows, with .las export supported through DJI Terra, giving you both correction methods from one piece of hardware.
Quad-constellation tracking across GPS, GLONASS, BeiDou, Galileo and QZSS maintains a reliable fix in built-up and partially obstructed environments where a single-constellation receiver would struggle.
Main Features
- 1 cm + 1 ppm horizontal and 1.5 cm + 1 ppm vertical accuracy with RTK fix
- Supports NTRIP network RTK and DJI D-RTK 2 Mobile Station
- TimeSync 2.0 for microsecond-level camera and position alignment
- Raw data logging for PPK post-processing workflows
- Reduces reliance on ground control points
- Tool-free thumbscrew mounting
- Supported in DJI Pilot 2 and DJI Terra
Specifications
- Positioning Accuracy (RTK FIX): 1 cm + 1 ppm horizontal; 1.5 cm + 1 ppm vertical
- GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS
- Weight: 24 g ± 2 g
- Dimensions: 50.2 × 40.2 × 66.2 mm
- Power Consumption: Approx. 1.2 W
- Interface: USB-C (aircraft top accessory port)
Compatibility
- DJI Mavic 3 Enterprise
- DJI Mavic 3 Thermal
Please note: The RTK Module has no IP rating and is not waterproof. Use in dry conditions only.
